The Pudong Advance is a PET Stretch Blow Moulding Machine, which is able to produce bottles from 100mL to 1500mL. It is characterized through below mentioned Highlights:
- Preform conveyor equipped with sliding wheels, precise orientation, stable and reliable.
- Operation panel by touch LCD, friendly interface and easy operation.
- Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost.
- 5-point double toggle clamping unit by optimized design for higher clamping force and speed.
- Low power consumption while long service life.
- Control panel adopts touch LCD, easy operation with friendly interface.
5-Point Double Toggle Clamping device in optimized design with high clamping force, fast speed and long life span.
Hot air from heating zones goes outdoor with ventilation speed controlled by computer improves indoor working condition.
All upper covers can be lifted up-sideward when doing services to avoid mess, save space and keep site organized.
PARKER, FESTO Valves
High pressure valve PARKER and low pressure valve FESTO guarantee machine reliable performance. FESTO swing valve controls perform feed-in and bottle take-out.
MITSUBISHI Controller with touch on screen for easy operation.
MITSUBISHI Frequency Converters are used for control speed of preform loading and air exhausting.
Sliding Wheel Preforms Feeder feed preforms precisely and moving smoothly.
8 modules are installed on the machine to regulate and feedback the temperature on multiple heating sections for different preform design to have better bottle formation.
ModelPudong AdvanceGeneralTheoretical Capacity2000 BPHNumber of Mold Cavity2 CavityBottle Volume0.1 ~ 1.5 LitreOuter Neck DiameterDia. 28-30 mmBottle Diameter<= 90 mmBottle Height<= 320 mmCooling WaterWater Pressure3~5 Bar,Water Temperature10-12 0CWater Flow30 Litre/min.AirDriving Air7 Bar, 1.4 m3/min.Blowing Air35 Bar, 2.5 m3/min.PowerTotal Power35 KwHeating Power32 KwMachineDimension2.7×1.8×2.03 mWeight3000 kgs