Pudong Speedster
- Equipped with servo motor to ensure stable running and precise positioning.
- Preform conveyor with sliding wheels.
- Clamping unit adopts hydro-pneumatic enhanced cylinder, thus mold closes at high speed but low pressure to reduce cycle time, or MOLD-LOCK at MOLD-CLOSE-END.
- Low power consumption while long service life.
- Control panel adopts touch LCD, easy operation with friendly interface.
- Multi-zone regulatable heating system to ensure heating equality for blow mold at best performance.
Typical Parts:
- Pneumatic related (cylinder, tube, tie-in), FESTO/Germany ;
Hydro-pneumatic enhanced cylinder, Italy ; - Controller Controller (with Touch LCD), OMRON/Japan ;
- Inverter, OMRON/Japan
Model | Speedster | |
General | Heater Type | Infrared |
Capacity | 250ml: 3000 BPH 500ml: 2700-2800 BPH 1500ml: 2500-2600BPH |
|
Bottle Vol. | 100ml ~ 1500ml | |
Cavity | 3 Cav. | |
Bottle Diameter | <=95 mm | |
Outer Neck Diameter | Dia.28-30 mm | |
Bottle Height | <=330 mm | |
Cooling Water | Water Pressure | 5-6 Bar |
Water Flow | 30 Ltr/min. | |
Temperature | 10-12 0C | |
Heat Consumption | 5400 Kcal/h | |
Air | Driving Air | 7Bar, 1.4m3/min. |
Blowing Air | 35Bar, 3.0m3/min. | |
Power | Total Power | 67.5 Kw |
Heater Power | <=64 Kw | |
Machine | Dimension | 6.0×1.5×3.0 m |
Weight | 3500 kgs | |
Interface | Air Inlet | 3/4″, 20mm (Outer Screw) |
Delivery Time | 50 Days | |
Payment Term | 30% T/T advance as deposit, balance 70% by L/C at sight. |