Pudong VS2200/4000 Essential

Pudong Essential Stretch Blow Molding Machine is used to produce PET bottles from PET preform for mineral water, beverage, edible oil, cosmetics, detergents, medicine and farm chemicals, etc..

The wide applicability for both narrow and wide neck, reliable capability make Essential stretch blow molding machine become popular and attractive to medium and small size bottle and drink manufacturer around the world.

Essential fully auto Stretch Blow Molding Machine consists consists of two parts: host (including Bottle Blowing unit, Infrared Preform Heating unit), Preform Feeder. All the operation will be done automatically by PLC system (Siemens Touch LCD). The max production capacity of VS-machine is 4000 bottles per hour using 4-cavity blow mould, volume from 0.1 to 2.0 Liters, neck size up to 40mm.

Best of all, only to change the blow mold to produce different shape bottle in less time and for less cost, which is very suitable for the small and medium sized bottle maker and drink manufacturers to produce the different shape of bottle with their own design, company logo and trade mark.

Mold change for Essential takes less than 30 minutes. Essential nowadays enjoys advantage such as low investment, high efficiency, easy operation, low maintenance, high quality control all over the world.

Related Media

Overview

  • Preform conveyor equipped with sliding wheels, precise orientation, stable and reliable.
  • Operation panel by touch LCD, friendly interface and easy operation.
  • Layered preform heating system, easy temperature regulation, uniform heating effect to improve blow molding result to the utmost.
  • 5-point double toggle clamping unit by optimized design for higher clamping force and speed.
  • Low power consumption while long service life.
  • Control panel adopts touch LCD, easy operation with friendly interface.
Typical Features


Toggle Clamping
Toggle Mechanism of PET Stretch Blow Molding Machine model VS2200, VS4000

5-Point Double Toggle Clamping device in optimized design with high clamping force, fast speed and long life span.


Ventilation Duct
Ventilation of PET Stretch Blow Molding Machine model VS2200, VS4000

Hot air from heating zones goes outdoor with ventilation speed controlled by computer improves indoor working condition.


Up-sideward Cover
Cover of PET Stretch Blow Molding Machine model VS2200, VS4000

All upper covers can be lifted up-sideward when doing services to avoid mess, save space and keep site organized.


PARKER, FESTO Valves
Valves of PET Stretch Blow Molding Machine model VS2200, VS4000

High pressure valve PARKER and low pressure valve FESTO guarantee machine reliable performance. FESTO swing valve controls perform feed-in and bottle take-out.


MITSUBISHI Controller
PLC of PET Stretch Blow Molding Machine model VS2200, VS4000

MITSUBISHI Controller with touch on screen for easy operation.
MITSUBISHI Frequency Converters are used for control speed of preform loading and air exhausting.


Sliding Wheel

Sliding Wheel Preforms Feeder feed preforms precisely and moving smoothly.


Module

8 modules are installed on the machine to regulate and feedback the temperature on multiple heating sections for different preform design to have better bottle formation.

 

 

 

 

 

Model VS2200 VS4000
General Real Output 0.5L Water: 2200 BPH
2.0L Water: 1800 BPH
0.5L Water: 4000 BPH
2.0L Water: 3400 BPH
Number of Mold Cavity 2 Cavity 4 Cavity
Bottle Volume 0.2 ~ 2.25 Litre 0.2 ~ 2.25 Litre
Outer Neck Diameter Dia. 15-40 mm Dia. 15-40 mm
Bottle Diameter <=105 mm <=105 mm
Bottle Height 60~350 mm 60~350 mm
Cooling Water Water Pressure 3~5 Bar 3~5 Bar
Water Temperature 10-12 0C 10-12 0C
Water Flow 30 Litre/min. 60 Litre/min.
Air Driving Air 7 Bar, 1.4 m3/min. 7 Bar, 2.2 m3/min.
Blowing Air 35 Bar, 2.5 m3/min. 35 Bar, 4.0 m3/min.
Power Total Power 43 Kw 85 Kw
Heating Power 40 Kw 80 Kw
Machine Dimension 2.8×1.8×2.2 m (Host)
2.3×1.2×2.45 (Autoloader)
3.8×2.0x2.2 m (Host)
2.3×1.2×2.45 (Autoloader)
Weight 2800 kgs (Host)
500 kgs (Autoloader)
3900 kgs (Host)
500 kgs (Autoloader)
Price for machine only (no mold included) N/A N/A
Delivery Time 60 Days 75 Days
Payment Term 30% T/T advance as deposit, balance 70% by L/C at sight. 30% T/T advance as deposit, balance 70% by L/C at sight.